N.C. Department of Environment and Natural Resources
 Welcome to the North Carolina Division of Air Quality
Emission Inventory >> Forms & Other Tools

North Carolina Point Source Emissions Inventory

Emission inventory notification letters for each Title V facility required to do an emission inventory due by June 30, 200X will normally be mailed by certified mail from the appropriate regional office in late January each year. Facilities designated Synthetic Minors and Small will be mailed notification letters six months prior to their normally scheduled permit expiration date. Emission inventories for the specified calendar year (CY) are then due with the permit renewal (or modification) application, at least 90 days prior to its normal expiration. A table of expiration dates, their inventory due dates and Calendar Year of the required inventory is provided for your convenience at the following link: Inventory Schedule [PDF] .


Air Emissions Reporting On-line (AERO)
This link is accessible by facilities required to provide an emission inventory update as defined in a notification letter mailed from the Division of Air Quality. Access is provided to the Air Emissions Reporting On-line (AERO) web site by clicking the link above. Authorized (by Responsible Official) facility staff, must use the User Id and PIN sent in the notification letter that defined the inventory requirement. From this web page, instructions are provided to download and print the required forms that have been pre-filled with facility information from DAQ's database, or to access the on-line update capability.

HELP screens and links to a Comments field are provided throughout the system. Facility staff and representatives should also feel free to call the appropriate inventory contact at the appropriate DAQ Regional office for more information or help in navigating the on-line submittal process. Data submitted via this web site will be reviewed by DAQ before being accepted as "approved". Submittal of complete documentation of calculations and the certification of accuracy of the facility's Responsible Official are also required before the inventory may be approved.

General Information Form [DOC]
Historically, this information has been updated when the emission inventory was provided. It is now due any time the related information changes. This one page form may used for submitting updates to company name, addresses, contacts, telephone numbers, etc., if these occur. Eventually, this form will likely be supplemented or replaced by a web page that will allow these updates to be made electronically. Also, there are other avenues, such as a permit renewal or application that may result in the same information being updated to DAQ. If such information is being updated by other means, only one submittal should be necessary for the corrections to appear across DAQ's databases.

Blank Emission Inventory Point Source Forms
In the past, blanks of the required forms have been provided for facilities to use to submit the required information. With the move toward more electronic submittals, these forms are no longer provided, and are replaced by the custom/facility-specific forms that may be downloaded at the AERO link above, or by updating on-line. Forms from previous years will not be accepted. Pen and ink corrections made directly on the custom facility-specific forms provided on line are acceptable, if needed and those changes are done legibly.

Instructions and Inventory Tools

Instructions For Air Pollutant Point Source Emission Inventory (Revised January 2014)
These are the instructions for completing the paper inventory forms, whether Title V or others. They contain general instructions, definitions, form-by-form instructions and other emission estimation guidance. Any subsequent necessary revisions and updates will also be posted here. Please contact your regional emission inventory contact if you have questions and/or comments. Thank you in advance for such feedback.

NC GHG Emission Inventory Instructions

Source Classification Code (SCC) Finder    Example [PDF]
SCC is an acronym for "Source Classification Code." An SCC is an eight-digit number that EPA uses to classify various industrial sources for purposes of relating to emission factors, grouping common "kinds" of sources, etc. North Carolina DAQ developed this "finder" with an intent to make it easier to find a specific SCC for a particular process or operating scenario. The organization, or hierarchy, is set up somewhat differently than the EPA spreadsheet and the SCC's included in the finder do not include some EPA SCC's that are not found in NC. Note also that the text wording for each code may not be in exact agreement with EPA's listing, but will have the same meaning and still translate into the proper number.

The codes are broken down as follows:
    First digit = broad source description category
    Next two digits = industry or type specific description
    Next three digits = source type and/or raw material, and
    Final two digits = specific source type and units of throughput
(Note that future versions or updates of SCC's will likely have "units" as a separate entity)

Tables of Pollutants for North Carolina Emission Inventory and Permitting Purposes (Revised August 25, 2006)

Please note that the lists of HAPs and TAPs from the Clean Air Act and in NC Rules, respectively, are the final authority and this list is primarily for user convenience and consistency of forms and formats.

This list is NOT to be confused as a listing of all VOC or particulate matter compounds that are to be reported under those "criteria" pollutant definitions. Further listing of VOCs that are not HAPs or TAPs, that are excluded from reporting for reasons of photochemical reactivity are listed in the instructions for the inventory. Exclusion from reporting as a photochemically non-reactive VOC does not exclude them from being reported as a HAP or TAP.

  • Introductory Text and Log of Revisions (Revised February 9, 2009)  [PDF]
  • Tables of Air Pollutants for North Carolina Emissions Inventory and Permit Purposes [PDF] [XLS] w/TABS for
    • Criteria Pollutants (Revised March 15, 2005)
    • Hazardous and Toxic Air Pollutants (Revised March 7, 2012)
    • Groups of Hazardous Air Pollutants and Lists of Common Constituents
      (Revised August 25, 2006)
    • Other Non-Criteria, Non-HAP, Non-TAP Pollutants Required to be Reported in the Emission Inventory (Revised February 9, 2009)

Uniform Policy and Documentation Standards for Emission Inventory Estimates [PDF]
The documentation of emission estimates used for emission inventories is a very important aspect of the inventory. The documentation is used as a basis for quality assurance and verification of the validity of information submitted on the forms or via the data system. This document is provided as a guide on how to minimize the bulky, expensive and repetitive documentation, but still provide information necessary to allow DAQ engineers and other staff to complete their jobs.

Partial Compilation of North Carolina Statutes Providing Authority for Collection of Air Emissions Data

  • §143-215.3(a)(2) - Additional Powers. (General Authorities): [PDF]
  • §143-215.3C - Confidential information protected. [PDF]
  • §143-215.65 - Reports required. [PDF]
  • §143-215.107(a)(4) - Air quality standards and classifications; Duty to Adopt...; To collect information... [PDF]
  • §143-215.114B(a)(i) - Enforcement procedures: criminal penalties. [PDF]

 Get Acrobat Reader To view and print PDF files you must install the Adobe Acrobat reader. It is available, free of charge, from Adobe.

Email us

Last Modified: Mon June 09 10:42:24 2014
 Visit the NCDENR web portal
Top of Page